What Are Features Of 36V 18-85-17 Cat F30 Forklift Battery?
The 36V 18-85-17 Cat F30 forklift battery is a 640Ah lithium-ion pack built for Class III forklifts and warehouse equipment. Featuring LiFePO4 chemistry, it offers 3,000+ cycles at 80% DoD, fast charging in 2 hours, and integrated CANbus communication for real-time diagnostics. Its IP65-rated steel casing and -20°C to 60°C operating range ensure reliability in harsh environments. Pro Tip: Always use CAT-approved chargers to maintain warranty compliance.
36V 250Ah LiFePO4 Forklift Battery
What are the technical specifications of the Cat F30 battery?
The 36V Cat F30 delivers 640Ah capacity (23 kWh) via 112 LiFePO4 cells in 36S configuration. Key metrics include 0.5C continuous discharge (320A), 1000A 3-sec peak current, and ±1% cell voltage balancing. Dimensions: 1220x520x620mm (LxWxH), mass 425 kg. Pro Tip: Check terminal alignment (DIN 43-2-B) to prevent connector arcing in humid warehouses.
Unlike traditional lead-acid batteries, the F30 operates efficiently at partial states of charge without sulfation risks. Charging terminates at 43.2V (3.6V/cell) using CC-CV algorithms. A real-world example: In 3-shift logistics centers, the F30 reduces downtime by 65% versus lead-acid counterparts. But how does thermal management prevent overheating? The pack uses liquid-cooled plates between cells, maintaining temps below 40°C even at 1C charging.
| Feature | 36V F30 | 48V Lead-Acid |
|---|---|---|
| Cycle Life | 3,000+ | 1,200 |
| Charge Time | 2h | 8h |
| Operating Temp | -20°C–60°C | 0°C–40°C |
How does the F30’s design improve forklift performance?
The Cat F30’s modular design allows sectional replacement of 24V/18Ah cell blocks instead of full-pack swaps. Its dual-stage compression system applies 15kgf preload to cells, reducing swelling by 70% versus unclamped designs. Pro Tip: Use vibration-dampening mounts to protect BMS connectors in uneven terrain.
Beyond hardware, the F30’s CANbus J1939 interface enables fleet managers to monitor SoH, temperature, and cycle counts via CAT’s ESi platform. For instance, a German auto plant reported 22% fewer unplanned maintenance stops after switching to F30 batteries. Worried about compatibility? The DIN-standard terminal layout works with most European and Asian forklift models post-2015.
What safety mechanisms are integrated?
The F30 incorporates 12-layer safeguards including temperature fuses, overvoltage lockouts (>44V), and ground-fault detection (<10mA leakage). Its BMS disconnects loads within 50ms during short circuits. Pro Tip: Always check the status LED (green=operational, red=fault) before daily use.
Practically speaking, the multi-stage safety system prevented a thermal runaway incident in a Dubai warehouse where ambient temps hit 55°C. The BMS throttled discharge rates by 40%, maintaining safe operations. Did you know? The F30’s flame-retardant ABS casing meets EN 45545-2 rail fire standards, a rarity in forklift batteries.
Battery Expert Insight
FAQs
Yes, if terminals match DIN 43-2-B specs. However, advanced BMS features like adaptive charge profiles require CAT’s SDK for full integration.
Is retrofitting lead-acat sites to F30 complex?
Most facilities need upgraded 3-phase 32A outlets (IEC 60309) and bracket modifications. Consult CAT’s retrofit guide to avoid alignment issues.