What Are Details Of 36V 18-85-17 Hyster E30 XL2 Forklift Battery?
The Hyster E30 XL2 36V 18-85-17 battery is a lead-acid battery designed for Hyster electric forklifts. It features 36V nominal voltage with a capacity of ~850Ah (18 cells, 17-hour discharge rate), optimized for extended operation in material handling. Pro Tip: Always verify terminal polarity (SAE standard) to avoid reverse connections. For parts, refer to Hyster Hypass Parts & Service System, but note that Class2/3 models aren’t covered.
Car Battery Product Category – HeatedBattery
What are key specifications of 36V 18-85-17?
This 36V lead-acid battery delivers 850Ah over 17 hours. Dimensions: ~1200x300x500mm, weight ~1,100kg. Designed for Hyster E30 XL2 and similar models. Pro Tip: Use AGM alternatives to reduce maintenance—flooded cells require weekly water checks.
The 18-85-17 code indicates cell configuration (18) and discharge duration (17h). Deep-cycle design supports 1,500+ cycles at 50% DoD. Analogous to car batteries but scaled for industrial loads. For example, its 30.6kWh capacity powers 6–8hr shifts in 3–5 ton lifts. Warning: Improper equalization charging accelerates sulfation.
How does it compare to lithium alternatives?
Lead-acid offers lower upfront costs but higher lifetime expenses. Lithium variants (e.g., LiFePO4) provide 2x cycles at half the weight. Would your ops benefit from faster charging?
| Parameter | 36V 18-85-17 | 36V 300Ah LiFePO4 |
|---|---|---|
| Cycle Life | 1,500 | 3,500+ |
| Weight | 1,100kg | 400kg |
| Charge Time | 8–10h | 2–3h |
36V 250Ah LiFePO4 Forklift Battery
Battery Expert Insight
FAQs
Yes, but require BMS/charger upgrades. Lithium’s 400kg weight savings may improve forklift stability and payload capacity by 8–12%.
How often to water lead-acid cells?
Every 10–14 days. Use deionized water only—mineral deposits shorten lifespan.